- Is 2 feet deep enough for fence posts?
- How many bags of concrete do I need for a 6×6 fence post?
- How do you mix Postcrete?
- How deep should a 6 foot fence post be in the ground?
- Should I Concrete my fence posts?
- How deep should a 8 foot fence post be?
- Can fence posts be 10 feet apart?
- How many bags of concrete do I need for a post hole?
- How many bags of concrete do I need for a 4×4 post?
- Are 6×6 fence posts better than 4×4?
- How do I keep my post level while concrete dries?
- Will wooden posts rot in concrete?
Is 2 feet deep enough for fence posts?
The minimum depth that you should dig your fence post holes for panel sections is 2 feet.
A general formula is to dig the holes one-third to one-half of the post’s aboveground height.
The deeper you dig the holes, the more stability your fence has, but you must also purchase longer posts..
How many bags of concrete do I need for a 6×6 fence post?
5cf), then buy enough bags of concrete for that amount. Buy a couple extra bags, if you don’t use them you can always return them. As I recall, a 60# bag of concrete is about . 5cf, so you’d need 3 bags per hole.
How do you mix Postcrete?
No mixing is required. For best results follow these instructions: 1) Dig hole to correct depth and width relevant to post size (see table on reverse). 2) Fill hole with water to a third of the depth. 3) Pour in Postcrete evenly around post until no standing water is visible (powder completely covers water surface).
How deep should a 6 foot fence post be in the ground?
Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).
Should I Concrete my fence posts?
Concrete is the most secure material for setting fence posts, especially if you have sandy soil. … Using premixed concrete rather than dry concrete will ensure ultimate security. While concrete is sturdy, it lacks the drainage of gravel and can trap moisture, ultimately leading to rot.
How deep should a 8 foot fence post be?
3 feetIn general, holes should be at least 3 feet deep for posts that extend 8 feet or more above ground level. Posts that extend 6 feet above ground level should have holes at least 2 1/2 feet deep.
Can fence posts be 10 feet apart?
Typical spacing is right around 8 feet between each post however different circumstances may call for different measurements and it is not uncommon to have spacing between posts reach up to 10 feet. Once you have a rough idea of your post layout start by digging your first hole.
How many bags of concrete do I need for a post hole?
1 – 4 bagsMost fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.
How many bags of concrete do I need for a 4×4 post?
Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 – 48 hours.
Are 6×6 fence posts better than 4×4?
They warped a bit but it doesn’t affect looks or sturdiness. 4×4 is more common but 6×6 also regularly used. They look better, are stronger, and will last longer IMO.
How do I keep my post level while concrete dries?
Fill the hole up to a depth of 8 inches from ground level with 1/2-inch drainage gravel. Use rough-cut gravel with sharp edges. It will hold the post better than smooth rock.
Will wooden posts rot in concrete?
Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. … The concrete at the top should be sloped away from the post to grade level to avoid water pooling around the base.